our PG1000 product line

Compare the features of the different PG1000 systems including specialized 400-K advanced gages. The 400-4K-1.3 Advanced REACTION was developed for Micro Drills inspection and the 400L-4K Advanced REACTION is fitted with an extended base. Our Advanced series features our proprietary REACTION software. If you’re looking for a more economical gage without all the features of our Advanced series check out Model 1000-200E. Be sure to check out our line of PG1000 accessories.

400-4K
Advanced REACTION series

400-K Advanced REACTION
COMPARE THE FEATURES

  • Advanced REACTION1 Software
  • 5 Mega Pixel ½ format USB 3.0 color camera
  • Low light imaging requires minimum light and reduces hot spots
  • 12x Microscope, magnifications from 12.5x to 145x
  • Do multiple screen scale, edge detection and comparisons in different colors over a single image
  • Magnifications automatically synchronized to PC
  • Base block and focus encoder
  • Focus indication
  • User Macros
  • DXF or DWG overlay software lockable to scale movement; DXF or DWG data collection
  • Automatic screen calibration with magnification change stabilization
  • Linear scale calibration
  • Euro-Tech PGEB6 6 Channel USB Encoder Interface
  • Free upgrade software downloads as hardware permits

200-4K Basic REACTION series

200-K Basic REACTION
COMPARE THE FEATURES

  • Basic REACTION1 Software
  • 5 Mega Pixel ½” format USB 3.0 color camera
  • Low light imaging requires minimum light and reduces hot spots
  • 6x Microscope, magnifications from 15x to 95x
  • DXF or DWG overlay software lockable to scale movement; DXF or DWG data collection
  • Automatic screen calibration
  • Linear scale calibration
  •  Euro-Tech PGEB6 6 channel USB Encoder Interface
  • Free upgrade software downloads as hardware permits
  • Do multiple screen, scale, edge detection and comparisons in different colors over a single image
  • Uses macros

Model 1000-200E

  • Competitive cost
  • Robust, shop floor durable
  •  High quality Swiss centering microscope with protractor for angle measurement
  • Image viewed under magnification as corrected image
  •  10x and 25x standard magnification; 5x, 50x & 100x opt.
  • Uses same base and slides as software system
  • Can be upgraded to basic software system
  •  Designed exclusively for cutting tool inspection
  • Large selection of workholding accessories.

PG1000 Accessories

View our line of toolholding devices designed for cutting tool inspection.

1000-570-M (motorized)
concentricity fixture 1/8"-1"

1000-575
standard reticle ​

1000-515
light diffuser

1000-645
linear calibration reticle

1000-570
concentricity fixture

1000-209-2
15" V-block (375mm)

1000-571
conc. fixture (.010"-1/4")

1000-209-1
10" V-block (250mm)

1000-572
conc. fixture (3/8" - 2")

1000-026
5" mini V-clock (125mm)

1000-590
base block w/encoder

1000-650
gun drill fixture

1000-500-1 (for series 200)
large center fixture

1000-501
mini center fixture​

1000-500-2
large center fixture w/cable

1000-257
mini V-block

1000-030-3
V-block insert ​

1000-030
V-block insert

1000-510-1
50 taper

1000-510-2
40 taper

1000-648
Illumination Tube

1000-661-1
ring light for 200 series

1000-661-2
ring light for 400 series

1000-662
back light

request a quote

262.781.6777

The PG1000 is a product of Euro-Tech Corporation

Address N48 W14170 Hampton Ave., Menomonee Falls  Wisconsin, USA 53051

Close Menu